UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21301
                        
                            Issued:2003-12-03
                    
                            Revised:2012-03-27
                    
                            Style
                            21301
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating60, 75, 80, 90 or 105 deg C, 300 Vac, Horizontal flame, Optional - 60 deg C Wet, Optional - 60 deg C wet, Optional - Sunlight resistant.
		
			Conductor18 AWG - 10 AWG stranded, even sizes only. Stranding same as for Type SJT.
		
			InsulationExtruded PVC.
		
			Conductor AWG sizeMinimum average milsMinimum at any point mils
		
			18-123027
		
			104540
		
			Wet rated cable shall use RC QMTT2 suitable for a minimum 60 deg C water resistance, or if proprietary water resistant PVC compound is used, see Facing Page for compound designation.
		
			AssemblyTwo circuit conductor and one grounding conductor. Length of lay of insulated conductors shall not exceed the maximum specified in for Type SJT Cord.
		
			ShieldOver one or more insulated conductors, copper 85% minimum coverage employing 36-34 AWG strands. Alternatively, Aluminum Foil 100% coverage over the black and white conductor and 30% minimum coverage of a braided copper shield, 36-34, over the foil.
		
			JacketExtruded PVC
		
			Conductor AWG sizeMinimum average milsMinimum at any point mils
		
			18-143528
		
			124536
		
			106048
		
			Sunlight resistant cable shall use RC QMTT2 compound suitable for 720 hour sunlight resistance, or if proprietary sunlight resistant PVC compound is used, see Facing Page for compound designation.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseFor use in Appliances where: Equivalence to hard service cord is required. Metallic shielding is required around the conductors. An insulation grade jacket is required. Optional - May be used outdoors if QMTT2 compounds are used.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21301	Issued:2003-12-03
			Revised:2012-03-27


Rating	60, 75, 80, 90 or 105 deg C, 300 Vac, Horizontal flame, Optional - 60 deg C Wet, Optional - 60 deg C wet, Optional - Sunlight resistant.

Conductor	18 AWG - 10 AWG stranded, even sizes only. Stranding same as for Type SJT.

Insulation	Extruded PVC.
	Conductor AWG size	Minimum average mils	Minimum at any point mils
	18-12	30	27
	10	45	40
	Wet rated cable shall use RC QMTT2 suitable for a minimum 60 deg C water resistance, or if proprietary water resistant PVC compound is used, see Facing Page for compound designation.

Assembly	Two circuit conductor and one grounding conductor. Length of lay of insulated conductors shall not exceed the maximum specified in for Type SJT Cord.

Shield	Over one or more insulated conductors, copper 85% minimum coverage employing 36-34 AWG strands. Alternatively, Aluminum Foil 100% coverage over the black and white conductor and 30% minimum coverage of a braided copper shield, 36-34, over the foil.

Jacket	Extruded PVC
	Conductor AWG size	Minimum average mils	Minimum at any point mils
	18-14	35	28
	12	45	36
	10	60	48
	Sunlight resistant cable shall use RC QMTT2 compound suitable for 720 hour sunlight resistance, or if proprietary sunlight resistant PVC compound is used, see Facing Page for compound designation.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	For use in Appliances where: Equivalence to hard service cord is required. Metallic shielding is required around the conductors. An insulation grade jacket is required. Optional - May be used outdoors if QMTT2 compounds are used.