UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21315
                        
                            Issued:2004-03-01
                    
                            Revised:2019-11-07
                    
                            Style
                            21315
                        
                            Multiconductor Cable with Extruded Non-integral Jacket.
                    
			Rating60 deg C, 600 Vac, Cable flame.
		
			InsulationLabeled or complies with manufacturer's Procedure.
		
			AssemblyTwo or more twisted singles or groups of twisted singles twisted together or groups may be laid parallel to form flat, oval, or round cables. May use same or mixed AWG. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly.
		
			CoveringOptional.
		
			ShieldOptional.
		
			JacketPUR
		
			dia. in inches
		
			0.700 or less30 mils min average24 mils minimum at any point
		
			0.701-1.000 dia45 avg36 min
		
			1.001-1.500 dia60 avg48 min
		
			1.501-2.500 dia80 avg64 min
		
			Equivalent diameter of flat assembly = 1.1284 x (TW)0.5
  where T is the thickness of the assembly under jacket,
  and W is the width of the assembly under jacket.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring and external interconnection of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21315	Issued:2004-03-01
			Revised:2019-11-07


Rating	60 deg C, 600 Vac, Cable flame.

Insulation	Labeled or complies with manufacturer's Procedure.

Assembly	Two or more twisted singles or groups of twisted singles twisted together or groups may be laid parallel to form flat, oval, or round cables. May use same or mixed AWG. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly.

Covering	Optional.

Shield	Optional.

Jacket	PUR
	dia. in inches
	0.700 or less	30 mils min average	24 mils minimum at any point
	0.701-1.000 dia	45 avg	36 min
	1.001-1.500 dia	60 avg	48 min
	1.501-2.500 dia	80 avg	64 min
	Equivalent diameter of flat assembly = 1.1284 x (TW)0.5 where T is the thickness of the assembly under jacket, and W is the width of the assembly under jacket.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring and external interconnection of electronic equipment.