UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21341
                        
                            Issued:2004-02-18
                    
                            Revised:2011-11-18
                    
                            Style
                            21341
                        
                            Bonded flat ribbon cable.
                    
			Rating105 deg C, 30 Vac, Horizontal flame.
		
			Conductor40 AWG - 12 AWG, flat or round, solid or stranded round, tinned or bare copper. If flat, 1.0-10.0 mils thick, 10-100 mils wide.
		
			InsulationTPE, 4 mils min average, 3 mils minimum at any point bonded on each side.
		
			AssemblyTwo to 150 conductors laid straight or irregular parallel in one plane.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of circuits in electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21341	Issued:2004-02-18
			Revised:2011-11-18


Rating	105 deg C, 30 Vac, Horizontal flame.

Conductor	40 AWG - 12 AWG, flat or round, solid or stranded round, tinned or bare copper. If flat, 1.0-10.0 mils thick, 10-100 mils wide.

Insulation	TPE, 4 mils min average, 3 mils minimum at any point bonded on each side.

Assembly	Two to 150 conductors laid straight or irregular parallel in one plane.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of circuits in electronic equipment.