UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21342
                        
                            Issued:2004-03-08
                    
                            Revised:2011-10-20
                    
                            Style
                            21342
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating60 deg C, 300 Vac, Cable flame.
		
			InsulationLabeled or complies with manufacturer's AWM Procedure.
		
			AssemblyTwo or more singles, twisted pair, or more twisted pairs, or mixture of them, and optic fiber members which employ Nylon covering, minimum 5 mils, over glass fiber optic core are wrapped around a strength member composed of stranded steel wires. Barrier layer, fillers and/or core wrap optional. May use same or mixed AWG sizes. Manufacturer shall maintain a complete description of each assembly. Calculated diameter of round assembly under jacket should be less than 0.700 inch.
		
			ShieldOptional.
		
			JacketExtruded PVC, 40 mils min average, 32 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring or external interconnection of electronic equipment.The tag must additionally indicate "Centrally located steel strands wire is a strength member and not for current carrying purpose, it should never be connected to other than Ground".
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21342	Issued:2004-03-08
			Revised:2011-10-20


Rating	60 deg C, 300 Vac, Cable flame.

Insulation	Labeled or complies with manufacturer's AWM Procedure.

Assembly	Two or more singles, twisted pair, or more twisted pairs, or mixture of them, and optic fiber members which employ Nylon covering, minimum 5 mils, over glass fiber optic core are wrapped around a strength member composed of stranded steel wires. Barrier layer, fillers and/or core wrap optional. May use same or mixed AWG sizes. Manufacturer shall maintain a complete description of each assembly. Calculated diameter of round assembly under jacket should be less than 0.700 inch.

Shield	Optional.

Jacket	Extruded PVC, 40 mils min average, 32 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring or external interconnection of electronic equipment.The tag must additionally indicate "Centrally located steel strands wire is a strength member and not for current carrying purpose, it should never be connected to other than Ground".