UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21349
                        
                            Issued:2004-04-29
                    
                            Revised:2011-09-20
                    
                            Style
                            21349
                        
                            Jacketed Cable.
                    
			Rating80 deg C, 300 Vac, Cable flame.
		
			Conductor36 AWG minimum, solid or stranded.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyTwo or more individually insulated conductors or groups of insulated conductors cabled together to form a round cable. 
A flat or oval cable may also be constructed with use of rows of single conductors or groups of conductors. These groups may be connected by webs. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic tape wrap. The barrier may be applied over the twisted assembly of individual conductors, groups of conductors or individual conductors.

			ShieldOptional. May be placed over groups of conductors.
		
			CoveringOptional. A 6 mil or heavier PVC or Polyurethane covering may be extruded over the conductor assembly or shield.
		
			JacketTPU
		
			Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.700 inch or less30 mils24 mils
		
			0.701-1.000 inch45 mils36 mils
		
			1.001-1.500 inch60 mils48 mils
		
			1.501-2.500 inch80 mils64 mils
		
			2.501-4.000 inch110 mils88 mils
		
			4.001 inch and larger140 mils112 mils
		
			# Major dia if cable is flat or oval.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 21349	Issued:2004-04-29
			Revised:2011-09-20


Rating	80 deg C, 300 Vac, Cable flame.

Conductor	36 AWG minimum, solid or stranded.

Insulation	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Two or more individually insulated conductors or groups of insulated conductors cabled together to form a round cable. A flat or oval cable may also be constructed with use of rows of single conductors or groups of conductors. These groups may be connected by webs. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic tape wrap. The barrier may be applied over the twisted assembly of individual conductors, groups of conductors or individual conductors.

Shield	Optional. May be placed over groups of conductors.

Covering	Optional. A 6 mil or heavier PVC or Polyurethane covering may be extruded over the conductor assembly or shield.

Jacket	TPU
	Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.700 inch or less	30 mils	24 mils
	0.701-1.000 inch	45 mils	36 mils
	1.001-1.500 inch	60 mils	48 mils
	1.501-2.500 inch	80 mils	64 mils
	2.501-4.000 inch	110 mils	88 mils
	4.001 inch and larger	140 mils	112 mils
	# Major dia if cable is flat or oval.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection of electronic equipment.