UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21350
                        
                            Issued:2004-04-27
                    
                            Revised:2012-04-25
                    
                            Style
                            21350
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating60 deg C, 30 Vac, Cable flame.
		
			Conductor30 AWG - 4/0 AWG solid or stranded round. May include mixed AWG sizes.
		
			InsulationLabeled or complying with Manufacture's AWM Procedure.
		
			AssemblyTwo or more insulated singles twisted together. Lay not specified. Fillers and/or barrier layers optional. Manufacturer shall maintain a complete description of each assembly.
		
			CoveringOptional.  A 6 mil, or heavier, FRPE covering may be extruded over conductor assembly.
		
			ShieldOptional.
		
			JacketExtruded FRPE
		
			Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.700 inch or less30 mils24 mils
		
			0.701-1.000 inch45 mils36 mils
		
			1.001-1.500 inch60 mils48 mils
		
			1.501 inch and larger80 mils64 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of appliances and external interconnection of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 21350	Issued:2004-04-27
			Revised:2012-04-25


Rating	60 deg C, 30 Vac, Cable flame.

Conductor	30 AWG - 4/0 AWG solid or stranded round. May include mixed AWG sizes.

Insulation	Labeled or complying with Manufacture's AWM Procedure.

Assembly	Two or more insulated singles twisted together. Lay not specified. Fillers and/or barrier layers optional. Manufacturer shall maintain a complete description of each assembly.

Covering	Optional. A 6 mil, or heavier, FRPE covering may be extruded over conductor assembly.

Shield	Optional.

Jacket	Extruded FRPE
	Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.700 inch or less	30 mils	24 mils
	0.701-1.000 inch	45 mils	36 mils
	1.001-1.500 inch	60 mils	48 mils
	1.501 inch and larger	80 mils	64 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of appliances and external interconnection of electronic equipment.