UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21352
                        
                            Issued:2004-04-27
                    
                            Revised:2019-11-07
                    
                            Style
                            21352
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating75 deg C, 30 Vac, Cable flame.
		
			Conductor30 AWG - 4/0 AWG solid or stranded round, tinned or bare copper. May include mixed AWG sizes.
		
			InsulationLabeled or complying with Manufacturer's AWM Procedure.
		
			AssemblyTwo or more insulated singles twisted together. Lay not specified. Fillers and/or barrier layers optional. Manufacturer shall maintain a complete description of each assembly.
		
			ShieldOptional.
		
			CoveringOptional.  A 6 mil, or heavier, Extruded FRPE covering may be extruded over conductor assembly.
		
			JacketExtruded FRPE
		
			dia. in inches
		
			0.700 or less30 mils min average24 mils minimum at any point
		
			0.701-1.000 dia45 avg36 min
		
			1.001-1.500 dia60 avg48 min
		
			1.501 dia and larger80 avg64 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of appliances and external interconnection of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 21352	Issued:2004-04-27
			Revised:2019-11-07


Rating	75 deg C, 30 Vac, Cable flame.

Conductor	30 AWG - 4/0 AWG solid or stranded round, tinned or bare copper. May include mixed AWG sizes.

Insulation	Labeled or complying with Manufacturer's AWM Procedure.

Assembly	Two or more insulated singles twisted together. Lay not specified. Fillers and/or barrier layers optional. Manufacturer shall maintain a complete description of each assembly.

Shield	Optional.

Covering	Optional. A 6 mil, or heavier, Extruded FRPE covering may be extruded over conductor assembly.

Jacket	Extruded FRPE
	dia. in inches
	0.700 or less	30 mils min average	24 mils minimum at any point
	0.701-1.000 dia	45 avg	36 min
	1.001-1.500 dia	60 avg	48 min
	1.501 dia and larger	80 avg	64 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of appliances and external interconnection of electronic equipment.