UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21355
                        
                            Issued:2004-05-12
                    
                            Revised:2019-11-07
                    
                            Style
                            21355
                        
                            Multiple-Conductor Cable using Non-Integral Jacket.
                    
			Rating75 deg C, 30 Vac, VW-1 flame (construction A) Horizontal Flame (construction B).
		
			Conductor40 AWG min. solid or stranded round, tinned or bare copper.
		
			InsulationLabeled or complying with Manufacturer's AWM Procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs, parallel pairs, or groups of twisted conductors or parallel pairs twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the insulated conductors are not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional.
		
			CoveringExtruded PVC, 6 mil or heavier covering; extruded over the insulated conductor, over one or more groups of conductors, or over the entire cable assembly.
		
			JacketExtruded PE
		
			dia. in inches
		
			0.350 or less25 mils min average20 mils minimum at any point
		
			0.351-0.700 dia30 avg24 min
		
			0.701-1.000 dia40 avg32 min
		
			1.001-1.500 dia54 avg43 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseConstruction A: Internal wiring, rated VW-1, in Class 2 circuits only. Construction B: Internal wiring in Class 2 circuits only.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21355	Issued:2004-05-12
			Revised:2019-11-07


Rating	75 deg C, 30 Vac, VW-1 flame (construction A) Horizontal Flame (construction B).

Conductor	40 AWG min. solid or stranded round, tinned or bare copper.

Insulation	Labeled or complying with Manufacturer's AWM Procedure.

Assembly	Consists of two or more conductors, twisted pairs, parallel pairs, or groups of twisted conductors or parallel pairs twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the insulated conductors are not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Covering	Extruded PVC, 6 mil or heavier covering; extruded over the insulated conductor, over one or more groups of conductors, or over the entire cable assembly.

Jacket	Extruded PE
	dia. in inches
	0.350 or less	25 mils min average	20 mils minimum at any point
	0.351-0.700 dia	30 avg	24 min
	0.701-1.000 dia	40 avg	32 min
	1.001-1.500 dia	54 avg	43 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Construction A: Internal wiring, rated VW-1, in Class 2 circuits only. Construction B: Internal wiring in Class 2 circuits only.