UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21368
                        
                            Issued:2004-06-14
                    
                            Revised:2019-11-07
                    
                            Style
                            21368
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating80 deg C, 90 Vac, Horizontal flame.
		
			Conductor32 AWG minimum, solid or stranded.
		
			InsulationLabeled or complying with Manufacturer's AWM Procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a round cable. The lay of the conductor is not specified. A Braid are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldCoated Copper Braid.
		
			CoveringPVC tape, 9 mils min thickness.
		
			JacketExtruded PVC
		
			major dia. in inches
		
			0.200 or less38 mils min average30 mils minimum at any point
		
			0.201-1.000 dia45 avg36 min
		
			1.001-1.500 dia60 avg48 min
		
			1.501-2.500 dia80 avg64 min
		
			2.501 dia and larger110 avg88 min
		
			Misc.Tape - Extruded PVC (minimum thickness 0.023 mm). Drain Wire - (Optional) Stranded.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal or external wiring of electronic equipment and appliances.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21368	Issued:2004-06-14
			Revised:2019-11-07


Rating	80 deg C, 90 Vac, Horizontal flame.

Conductor	32 AWG minimum, solid or stranded.

Insulation	Labeled or complying with Manufacturer's AWM Procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a round cable. The lay of the conductor is not specified. A Braid are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Coated Copper Braid.

Covering	PVC tape, 9 mils min thickness.

Jacket	Extruded PVC
	major dia. in inches
	0.200 or less	38 mils min average	30 mils minimum at any point
	0.201-1.000 dia	45 avg	36 min
	1.001-1.500 dia	60 avg	48 min
	1.501-2.500 dia	80 avg	64 min
	2.501 dia and larger	110 avg	88 min

Misc.	Tape - Extruded PVC (minimum thickness 0.023 mm). Drain Wire - (Optional) Stranded.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal or external wiring of electronic equipment and appliances.