UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21369
                        
                            Issued:2004-06-14
                    
                            Revised:2011-11-28
                    
                            Style
                            21369
                        
                            Multiconductor cable with extruded non-integral jacket.
                    
			Rating80 deg C, 90 Vac, Horizontal flame.
		
			Conductor32 AWG minimum, solid or stranded.
		
			InsulationLabeled or complying with Manufacturer's AWM Procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a round cable. The lay of the conductor is not specified. A Braid is optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldCoated Copper Braid.
		
			Misc.Tape - Extruded PVC, 0.023 mm minimum thickness. Drain Wire - Optional, Stranded.
		
			JacketExtruded PUR
		
			Diameter of core assembly under jacket*Minimum average thicknessMinimum thickness at any point
		
			0.200 inch or less38 mils30 mils
		
			0.201-1.000 inch45 mils36 mils
		
			1.001-1.500 inch60 mils48 mils
		
			1.501-2.500 inch80 mils64 mils
		
			2.501 inch and larger110 mils88 mils
		
			* - Major dia if cable is flat or oval.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal or external wiring of electronic equipment and appliances.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21369	Issued:2004-06-14
			Revised:2011-11-28


Rating	80 deg C, 90 Vac, Horizontal flame.

Conductor	32 AWG minimum, solid or stranded.

Insulation	Labeled or complying with Manufacturer's AWM Procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a round cable. The lay of the conductor is not specified. A Braid is optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Coated Copper Braid.

Misc.	Tape - Extruded PVC, 0.023 mm minimum thickness. Drain Wire - Optional, Stranded.

Jacket	Extruded PUR
	Diameter of core assembly under jacket*	Minimum average thickness	Minimum thickness at any point
	0.200 inch or less	38 mils	30 mils
	0.201-1.000 inch	45 mils	36 mils
	1.001-1.500 inch	60 mils	48 mils
	1.501-2.500 inch	80 mils	64 mils
	2.501 inch and larger	110 mils	88 mils
	* - Major dia if cable is flat or oval.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal or external wiring of electronic equipment and appliances.