UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2137
                        
                            Issued:1959-05-01
                    
                            Revised:2012-02-09
                    
                            Style
                            2137
                        
                            Parallel Cable with Extruded Integral Insulation
                    
			Rating80 deg C, 300 Vac, FT2 flame.  Optional - 60 or 80 deg C Oil.
		
			Conductor18 and 16 AWG stranded, consisting of 30 AWG or smaller strands.
		
			InsulationExtruded PVC, 60 mils minimum average thickenss.
		
			AssemblyFour conductors, consisting of three 18 AWG and one 16 AWG.  Same as type SPT-2 except for the following minimum (pin gauge) dimensions: Wall thickness: 58 mils; Web thickness: 78 mils; Wall thickness after rip: 28mils.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electric refrigerators where ripped not more than 3 inches and where exposed to temperatures not exceeding 80 deg C.  May add where applicable dependent upon the compound used: and where exposed to oil at a temperature not exceeding (60 deg C or 80 deg C, whichever is applicable).  Polarity identification may be omitted.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2137	Issued:1959-05-01
			Revised:2012-02-09


Rating	80 deg C, 300 Vac, FT2 flame. Optional - 60 or 80 deg C Oil.

Conductor	18 and 16 AWG stranded, consisting of 30 AWG or smaller strands.

Insulation	Extruded PVC, 60 mils minimum average thickenss.

Assembly	Four conductors, consisting of three 18 AWG and one 16 AWG. Same as type SPT-2 except for the following minimum (pin gauge) dimensions: Wall thickness: 58 mils; Web thickness: 78 mils; Wall thickness after rip: 28mils.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electric refrigerators where ripped not more than 3 inches and where exposed to temperatures not exceeding 80 deg C. May add where applicable dependent upon the compound used: and where exposed to oil at a temperature not exceeding (60 deg C or 80 deg C, whichever is applicable). Polarity identification may be omitted.