UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21371
                        
                            Issued:2004-06-16
                    
                            Revised:2011-10-26
                    
                            Style
                            21371
                        
                            Multiconductor cable with extruded non-integral jacket.
                    
			Rating80 deg C, 30 Vac, Cable flame.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyConsists of two or more conductors or groups of conductors twisted together. The conductors or groups of conductors may be laid to form an oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly.
		
			BraidCopper, tinned or bare.
		
			JacketExtruded TPE.
		
			Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.400 inch or less24 mils20 mils
		
			0.401-0.700 inch30 mils24 mils
		
			0.701-1.500 inch45 mils36 mils
		
			1.501-2.500 inch60 mils48 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection or internal wiring of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21371	Issued:2004-06-16
			Revised:2011-10-26


Rating	80 deg C, 30 Vac, Cable flame.

Insulation	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Consists of two or more conductors or groups of conductors twisted together. The conductors or groups of conductors may be laid to form an oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly.

Braid	Copper, tinned or bare.

Jacket	Extruded TPE.
	Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.400 inch or less	24 mils	20 mils
	0.401-0.700 inch	30 mils	24 mils
	0.701-1.500 inch	45 mils	36 mils
	1.501-2.500 inch	60 mils	48 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection or internal wiring of electronic equipment.