UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2138
                        
                            Issued:1959-05-01
                    
                            Revised:2011-12-06
                    
                            Style
                            2138
                        
                            Parallel cable with extruded integral insulation
                    
			Rating90 deg C, 300 Vac, FT2 flame, Oil Resistant 60 deg C or 80 deg C (optional).
		
			ConductorThree No. 18 AWG and one No. 16 AWG, using No. 30 AWG, or smaller tinned or bare copper strands.
		
			InsulationIntegral with Jacket. same as type SPT-2 except for a nominal 60 mil wall of thermoplastic (PVC) compound suitable for use at 90 C in air or 60 C in oil, or Bulletin compounds if marked for use at 90 C in air and 80 C in oil. The following minimum (pin gauge) dimensions: Wall thicknes: 0.058 in., Web thickness: 0.078 in., Wall after rip: 0.028 in..
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electric refrigerators where ripped not more than three inches and where exposed to temperatures not exceeding 90 deg C. May add where applicable dependent upon the compound used: and where exposed to oil at a temperature not exceeding (60 deg C or 80 deg C, whichever is applicable). Polarity identification may be omitted.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2138	Issued:1959-05-01
			Revised:2011-12-06


Rating	90 deg C, 300 Vac, FT2 flame, Oil Resistant 60 deg C or 80 deg C (optional).

Conductor	Three No. 18 AWG and one No. 16 AWG, using No. 30 AWG, or smaller tinned or bare copper strands.

Insulation	Integral with Jacket. same as type SPT-2 except for a nominal 60 mil wall of thermoplastic (PVC) compound suitable for use at 90 C in air or 60 C in oil, or Bulletin compounds if marked for use at 90 C in air and 80 C in oil. The following minimum (pin gauge) dimensions: Wall thicknes: 0.058 in., Web thickness: 0.078 in., Wall after rip: 0.028 in..

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electric refrigerators where ripped not more than three inches and where exposed to temperatures not exceeding 90 deg C. May add where applicable dependent upon the compound used: and where exposed to oil at a temperature not exceeding (60 deg C or 80 deg C, whichever is applicable). Polarity identification may be omitted.