UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21387
                        
                            Issued:2004-09-09
                    
                            Revised:2012-04-18
                    
                            Style
                            21387
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating90 deg C, 1000 Vac, Cable flame.
		
			Conductor26 AWG minimum. Solid or stranded.
		
			Insulated ConductorLabeled or complying with the manufacturer's AWM Procedure.
		
			AssemblyTwo or more individually insulated conductors or groups of insulated conductors cabled together to form a round cable. A flat or oval cable may also be constructed with not more than three rows of single conductors or groups of conductors. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.
		
			CoveringOptional. Extruded TPE or other thermoplastic, 4 mils minimum thickness at any point, may be extruded over the conductor assembly or groups of conductors (with or without shields).
		
			ShieldOptional.
		
			JacketExtruded TPE.
		
			Dia of cable under jacket@Minimum average thicknessMinimum thickness at any point
		
			0.700 inch or less45 mils36 mils
		
			0.701-1.000 inch60 mils48 mils
		
			1.001-1.500 inch80 mils64 mils
		
			1.501-2.500 inch110 mils88 min
		
			2.500 inch and larger140 mils112 mils
		
			@ - Major dia if cable is flat or oval
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring or external wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21387	Issued:2004-09-09
			Revised:2012-04-18


Rating	90 deg C, 1000 Vac, Cable flame.

Conductor	26 AWG minimum. Solid or stranded.

Insulated Conductor	Labeled or complying with the manufacturer's AWM Procedure.

Assembly	Two or more individually insulated conductors or groups of insulated conductors cabled together to form a round cable. A flat or oval cable may also be constructed with not more than three rows of single conductors or groups of conductors. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.

Covering	Optional. Extruded TPE or other thermoplastic, 4 mils minimum thickness at any point, may be extruded over the conductor assembly or groups of conductors (with or without shields).

Shield	Optional.

Jacket	Extruded TPE.
	Dia of cable under jacket@	Minimum average thickness	Minimum thickness at any point
	0.700 inch or less	45 mils	36 mils
	0.701-1.000 inch	60 mils	48 mils
	1.001-1.500 inch	80 mils	64 mils
	1.501-2.500 inch	110 mils	88 min
	2.500 inch and larger	140 mils	112 mils
	@ - Major dia if cable is flat or oval

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring or external wiring.