UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21391
                        
                            Issued:2004-10-07
                    
                            Revised:2012-04-18
                    
                            Style
                            21391
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating80 deg C, 30 Vac, Cable flame.
		
			Conductor40 AWG minimum.
		
			InsulationLabeled or complying with Manufacturer's AWM Procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs, parallel pairs, or groups of twisted conductors or parallel pairs twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional.
		
			CoveringOptional. Optional. Extruded FRPE, 6 mils minimum at any point, applied over the conductor assembly.
		
			JacketPVC.
		
			Construction A External UseConstruction B Internal Use
		
			Dia of cable under jacketMinimum averageMinimum at any pointMinimum averageMinimum at any point
		
			0.350 inch or less20 mils17 mils15 mils12 mils
		
			0.351-0.700 inch30 mils24 mils30 mils24 mils
		
			0.701-1.000 inch40 mils32 mils40 mils32 mils
		
			1.001-1.500 inch54 mils43 mils54 mils43 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseConstruction A: Internal wiring or external interconnection of electronic equipment in Class 2 circuit only.Construction B: Internal wiring of electronic equipment in Class 2 circuit only.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 21391	Issued:2004-10-07
			Revised:2012-04-18


Rating	80 deg C, 30 Vac, Cable flame.

Conductor	40 AWG minimum.

Insulation	Labeled or complying with Manufacturer's AWM Procedure.

Assembly	Consists of two or more conductors, twisted pairs, parallel pairs, or groups of twisted conductors or parallel pairs twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Covering	Optional. Optional. Extruded FRPE, 6 mils minimum at any point, applied over the conductor assembly.

Jacket	PVC.
	Construction A External Use		Construction B Internal Use
	Dia of cable under jacket	Minimum average	Minimum at any point	Minimum average	Minimum at any point
	0.350 inch or less	20 mils	17 mils	15 mils	12 mils
	0.351-0.700 inch	30 mils	24 mils	30 mils	24 mils
	0.701-1.000 inch	40 mils	32 mils	40 mils	32 mils
	1.001-1.500 inch	54 mils	43 mils	54 mils	43 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Construction A: Internal wiring or external interconnection of electronic equipment in Class 2 circuit only.Construction B: Internal wiring of electronic equipment in Class 2 circuit only.