UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21408
                        
                            Issued:2005-02-02
                    
                            Revised:2011-08-11
                    
                            Style
                            21408
                        
                            Multiple-Conductor Cable with Extruded Non-Integral Jacket
                    
			Rating105 deg C, 300 Vac, Cable flame
		
			InsulationLabeled or complying with manufacturer's AWM Procedure
		
			AssemblyTwo or more singles, twisted pairs or groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval, or round cables. May use same or mixed AWG size. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly.
		
			ShieldOptional
		
			CoveringOptional
		
			JacketExtruded XLPE
		
			@ Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.700 inch or less30 mils24 mils
		
			0.701-1.000 inch45 mils36 mils
		
			1.001-1.500 inch60 mils48 mils
		
			1.501-2.501 inch80 mils64 mils
		
			@ - Major diameter if cable is flat or oval
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral
		
			UseInternal wiring and external interconnection of electronic equipment
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21408	Issued:2005-02-02
			Revised:2011-08-11


Rating	105 deg C, 300 Vac, Cable flame

Insulation	Labeled or complying with manufacturer's AWM Procedure

Assembly	Two or more singles, twisted pairs or groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval, or round cables. May use same or mixed AWG size. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly.

Shield	Optional

Covering	Optional

Jacket	Extruded XLPE
	@ Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.700 inch or less	30 mils	24 mils
	0.701-1.000 inch	45 mils	36 mils
	1.001-1.500 inch	60 mils	48 mils
	1.501-2.501 inch	80 mils	64 mils

	@ - Major diameter if cable is flat or oval

Standard	Appliance Wiring Material UL 758.

Marking	General

Use	Internal wiring and external interconnection of electronic equipment