UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21426
                        
                            Issued:2005-02-28
                    
                            Revised:2011-10-26
                    
                            Style
                            21426
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating90 deg C, 600 Vac, Cable flame.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyTwo or more singles, twisted pairs of groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Overall Assembly - The PVC Jacket extends to form a Web 750 mils wide between conductors; Web Minimum Average thickness and the Minimum Thickness at any point is an extension of the Jacket Thickness. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional.
		
			JacketExtruded PVC
		
			@ Diameter of Cable under jacketMinimum average thicknessMinimum thickness at any point
		
			0.700 inch or less30 mils24 mils
		
			0.701-1.000 inch45 mils36 mils
		
			1.001-1.500 inch60 mils48 mils
		
			1.501-2.500 inch80 mils64 mils
		
			2.501-4.000 inch110 mils88 mils
		
			4.001 or larger140 mils112 mils
		
			@ Major dia if cable is flat or oval.
		
			BraidOptional.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring and/or external interconnection.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 21426	Issued:2005-02-28
			Revised:2011-10-26


Rating	90 deg C, 600 Vac, Cable flame.

Insulation	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Two or more singles, twisted pairs of groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Overall Assembly - The PVC Jacket extends to form a Web 750 mils wide between conductors; Web Minimum Average thickness and the Minimum Thickness at any point is an extension of the Jacket Thickness. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Jacket	Extruded PVC
	@ Diameter of Cable under jacket	Minimum average thickness	Minimum thickness at any point
	0.700 inch or less	30 mils	24 mils
	0.701-1.000 inch	45 mils	36 mils
	1.001-1.500 inch	60 mils	48 mils
	1.501-2.500 inch	80 mils	64 mils
	2.501-4.000 inch	110 mils	88 mils
	4.001 or larger	140 mils	112 mils
	@ Major dia if cable is flat or oval.

Braid	Optional.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring and/or external interconnection.