UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21448
                        
                            Issued:2005-09-26
                    
                            Revised:2019-11-07
                    
                            Style
                            21448
                        
                            Multiconductor Cable with Extruded Non-Integral Jacket.
                    
			Rating105 deg C, 2000 Vdc, Cable flame.
		
			Conductor40 AWG min. solid or stranded.
		
			InsulationLabeled or complying with Manufacturer's AWM Procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			CoveringOptional. A 6 mil or heavier PVC covering may be extruded over the conductor assembly.
		
			ShieldOptional.
		
			JacketExtruded PVC
		
			major dia. in inches
		
			0.700 or less60 mils min average48 mils minimum at any point
		
			0.701-1.500 dia80 avg64 min
		
			1.501-2.50 dia110 avg88 min
		
			2.501 dia and larger140 avg112 min
		
			BraidOptional.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring or external interconnection of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21448	Issued:2005-09-26
			Revised:2019-11-07


Rating	105 deg C, 2000 Vdc, Cable flame.

Conductor	40 AWG min. solid or stranded.

Insulation	Labeled or complying with Manufacturer's AWM Procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Covering	Optional. A 6 mil or heavier PVC covering may be extruded over the conductor assembly.

Shield	Optional.

Jacket	Extruded PVC
	major dia. in inches
	0.700 or less	60 mils min average	48 mils minimum at any point
	0.701-1.500 dia	80 avg	64 min
	1.501-2.50 dia	110 avg	88 min
	2.501 dia and larger	140 avg	112 min

Braid	Optional.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring or external interconnection of electronic equipment.