UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21455
                        
                            Issued:2005-09-30
                    
                            Revised:2011-09-19
                    
                            Style
                            21455
                        
                            Multiconductor Cable with Extruded Non-Integral Jacket
                    
			Rating80 deg C, 30 Vac, Horizontal flame.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure with minimum rating of 80 deg C, 30 Vac.
		
			AssemblyTwo or more insulated conductors.
		
			CoveringOptional.
		
			ShieldOptional.
		
			JacketExtruded mPPE-PE
		
			Diameter of core assembly under jacket*Minimum average thicknessMinimum thickness at any point
		
			0.350 inch or less15 mils12 mils
		
			0.351-0.700 inch30 mils24 mils
		
			0.701-1.000 inch40 mils32 mils
		
			1.101-1.500 inch54 mils43 mils
		
			*Equivalent diameter of flat assembly = 1.1284 x (TW)^0.5 where T is the thickness of the assembly under jacket, and W is the width of the assembly under jacket.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 21455	Issued:2005-09-30
			Revised:2011-09-19


Rating	80 deg C, 30 Vac, Horizontal flame.

Insulation	Labeled or complying with manufacturer's AWM Procedure with minimum rating of 80 deg C, 30 Vac.

Assembly	Two or more insulated conductors.

Covering	Optional.

Shield	Optional.

Jacket	Extruded mPPE-PE
	Diameter of core assembly under jacket*	Minimum average thickness	Minimum thickness at any point
	0.350 inch or less	15 mils	12 mils
	0.351-0.700 inch	30 mils	24 mils
	0.701-1.000 inch	40 mils	32 mils
	1.101-1.500 inch	54 mils	43 mils
	*Equivalent diameter of flat assembly = 1.1284 x (TW)^0.5 where T is the thickness of the assembly under jacket, and W is the width of the assembly under jacket.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.