UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21456
                        
                            Issued:2005-09-30
                    
                            Revised:2011-10-26
                    
                            Style
                            21456
                        
                            Multiconductor cable with extruded non-integral jacket
                    
			Rating80 deg C, 30 Vac, Horizontal flame.
		
			InsulationLabeled or complying with manufacturers procedure.
		
			AssemblyTwo or more insulated conductors.
		
			CoveringOptional.
		
			ShieldOptional.
		
			JacketExtruded mPPE-PE.
		
			Diameter of core assembly under jacket *Minimum average thicknessMinimum thickness at any point
		
			0.250 inch or less15 mils12 mils
		
			0.251-0.350 inch22 mils18 mils
		
			0.351-0.424 inch30 mils24 mils
		
			0.425-0.700 inch60 mils48 mils
		
			* - Equivalent diameter of flat assembly = 1.1284 X (TW)^0.5. Where T is the thickness of the assembly under jacket, and W is the width of the assembly under jacket.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring in Class 2 circuits and both ends are terminated in connectors.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21456	Issued:2005-09-30
			Revised:2011-10-26


Rating	80 deg C, 30 Vac, Horizontal flame.

Insulation	Labeled or complying with manufacturers procedure.

Assembly	Two or more insulated conductors.

Covering	Optional.

Shield	Optional.

Jacket	Extruded mPPE-PE.
	Diameter of core assembly under jacket *	Minimum average thickness	Minimum thickness at any point
	0.250 inch or less	15 mils	12 mils
	0.251-0.350 inch	22 mils	18 mils
	0.351-0.424 inch	30 mils	24 mils
	0.425-0.700 inch	60 mils	48 mils
	* - Equivalent diameter of flat assembly = 1.1284 X (TW)^0.5. Where T is the thickness of the assembly under jacket, and W is the width of the assembly under jacket.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring in Class 2 circuits and both ends are terminated in connectors.