UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21459
                        
                            Issued:2005-10-20
                    
                            Revised:2011-09-19
                    
                            Style
                            21459
                        
                            Multiconductor Cable with Extruded Non-Integral Jacket.
                    
			Rating80 deg C, 600 Vac, Cable flame.
		
			Conductor36 AWG min., solid or stranded round.
		
			InsulationLabeled of complies with manufacturer's AWM Procedure. The designations of all styles of individual cables used in making up the cable assembly shall be available.
		
			AssemblyTwo or more individually insulated conductors or groups of insulated conductors cabled together to form a round cable. A flat or oval cable may also be constructed with not more than three rows of single conductors or groups of conductors. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.
		
			CoveringOptional. 4 mil or heavier wall of PVC or other thermoplastic covering may be extruded over the conductor assembly or groups of conductors (with or without shields).
		
			ShieldOptional.
		
			JacketPUR
		
			Dia of Cable Under Jacket in InchMinimum Average thicknessMinimum thickness at any point
		
			0.701-1.50080 mils64 mils
		
			1.501-2.500110 mils88 mils
		
			2.501 and larger140 mils112 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseAs internal wiring or external interconnection of electronic equipment (such as computers and business machines).
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 21459	Issued:2005-10-20
			Revised:2011-09-19


Rating	80 deg C, 600 Vac, Cable flame.

Conductor	36 AWG min., solid or stranded round.

Insulation	Labeled of complies with manufacturer's AWM Procedure. The designations of all styles of individual cables used in making up the cable assembly shall be available.

Assembly	Two or more individually insulated conductors or groups of insulated conductors cabled together to form a round cable. A flat or oval cable may also be constructed with not more than three rows of single conductors or groups of conductors. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.

Covering	Optional. 4 mil or heavier wall of PVC or other thermoplastic covering may be extruded over the conductor assembly or groups of conductors (with or without shields).

Shield	Optional.

Jacket	PUR
	Dia of Cable Under Jacket in Inch	Minimum Average thickness	Minimum thickness at any point
	0.701-1.500	80 mils	64 mils
	1.501-2.500	110 mils	88 mils
	2.501 and larger	140 mils	112 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	As internal wiring or external interconnection of electronic equipment (such as computers and business machines).