UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21464
                        
                            Issued:2005-11-15
                    
                            Revised:2011-08-11
                    
                            Style
                            21464
                        
                            Multiple-Conductor Cable with Extruded Non-Integral Jacket
                    
			Rating60 deg C, 30 Vac, Cable flame
		
			Conductor50 AWG - 2000 kcmil solid or stranded
		
			InsulationLabeled or complies with Manufacturers AWM Procedure
		
			AssemblyTwo or more insulated singles or groups of insulated singles cabled together to form a flat, oval or round assembly. Barrier layer and/or fillers optional. May use same or mixed AWG size.
		
			ShieldOptional
		
			JacketExtruded TPE
		
			@Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.700 inch or less30 mils24 mils
		
			0.701-1.000 inch45 mils36 mils
		
			1.001-1.500 inch60 mils48 mils
		
			1.501-2.500 inch80 mils64 mils
		
			2.501-4.000 inch110 mils88 mils
		
			4.001 inch and larger140 mils112 mils
		
			@ - Major diameter if cable is flat or oval
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral
		
			UseInternal Wiring and External Interconnection
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21464	Issued:2005-11-15
			Revised:2011-08-11


Rating	60 deg C, 30 Vac, Cable flame

Conductor	50 AWG - 2000 kcmil solid or stranded

Insulation	Labeled or complies with Manufacturers AWM Procedure

Assembly	Two or more insulated singles or groups of insulated singles cabled together to form a flat, oval or round assembly. Barrier layer and/or fillers optional. May use same or mixed AWG size.

Shield	Optional

Jacket	Extruded TPE
	@Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.700 inch or less	30 mils	24 mils
	0.701-1.000 inch	45 mils	36 mils
	1.001-1.500 inch	60 mils	48 mils
	1.501-2.500 inch	80 mils	64 mils
	2.501-4.000 inch	110 mils	88 mils
	4.001 inch and larger	140 mils	112 mils

	@ - Major diameter if cable is flat or oval

Standard	Appliance Wiring Material UL 758.

Marking	General

Use	Internal Wiring and External Interconnection