UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21465
                        
                            Issued:2005-11-18
                    
                            Revised:2012-05-07
                    
                            Style
                            21465
                        
                            Multiple Cable using non-integral jacket
                    
			Rating90 deg C, 1000 Vac, Horizontal flame.
		
			Conductor30 AWG - 2000 kcmil, solid or stranded, tinned or bare copper.
		
			Insulated SingleLabeled or complying with Manufacturer's AWM Procedure.
		
			CoveringInner - (Optional) 4 mil or heavier wall EPDM may be extruded over the conductor assembly or groups of conductors. Outer - (Optional) 1 mil or heavier PETP foil covering may be applied over the conductor assembly.
		
			ShieldOptional
		
			JacketEVA
		
			dia. in inches under the jacket
		
			0.750 or less55 mils min average44 mils minimum at any point
		
			0.751-1.000 dia110 avg88 min
		
			1.001-1.250 dia125 avg100 min
		
			1.251-1.500 dia140 avg112 min
		
			1.501-1.750 dia160 avg128 min
		
			1.751-2.000 dia180 avg144 min
		
			2.001-2.250 dia200 avg160 min
		
			2.251-2.500 dia220 avg176 min
		
			2.501-2.750 dia240 avg192 min
		
			2.751-3.000 dia260 avg208 min
		
			3.001-3.250 dia280 avg224 min
		
			3.251-3.500 dia295 avg236 min
		
			3.501-3.950 dia310 avg248 min
		
			3.951-4.450 dia330 avg264 min
		
			4.451-5.000 dia345 avg276 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21465	Issued:2005-11-18
			Revised:2012-05-07


Rating	90 deg C, 1000 Vac, Horizontal flame.

Conductor	30 AWG - 2000 kcmil, solid or stranded, tinned or bare copper.

Insulated Single	Labeled or complying with Manufacturer's AWM Procedure.

Covering	Inner - (Optional) 4 mil or heavier wall EPDM may be extruded over the conductor assembly or groups of conductors. Outer - (Optional) 1 mil or heavier PETP foil covering may be applied over the conductor assembly.

Shield	Optional

Jacket	EVA
	dia. in inches under the jacket
	0.750 or less	55 mils min average	44 mils minimum at any point
	0.751-1.000 dia	110 avg	88 min
	1.001-1.250 dia	125 avg	100 min
	1.251-1.500 dia	140 avg	112 min
	1.501-1.750 dia	160 avg	128 min
	1.751-2.000 dia	180 avg	144 min
	2.001-2.250 dia	200 avg	160 min
	2.251-2.500 dia	220 avg	176 min
	2.501-2.750 dia	240 avg	192 min
	2.751-3.000 dia	260 avg	208 min
	3.001-3.250 dia	280 avg	224 min
	3.251-3.500 dia	295 avg	236 min
	3.501-3.950 dia	310 avg	248 min
	3.951-4.450 dia	330 avg	264 min
	4.451-5.000 dia	345 avg	276 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.