UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21466
                        
                            Issued:2005-11-18
                    
                            Revised:2019-11-07
                    
                            Style
                            21466
                        
                            Multiconductor Cable with Extruded Non-Integral Jacket
                    
			Rating80 deg C, 300 Vac, Horizontal flame.
		
			ConductorNo. 32 AWG minimum, solid or stranded round, tinned or bare copper.
		
			InsulationLabeled or complying with Manufacturer's AWM Procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductor is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional.
		
			CoveringOptional. A 6 mil or heavier covering may be extruded over the conductor assembly.
		
			JacketTPU
		
			dia. in inches
		
			0.700 or less35 mils min average28 mils minimum at any point
		
			0.701-1.000 dia45 avg36 min
		
			1.001-1.500 dia60 avg48 min
		
			1.501-2.500 dia80 avg64 min
		
			2.501-4.000 dia110 avg88 min
		
			4.001 dia and larger140 avg112 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 21466	Issued:2005-11-18
			Revised:2019-11-07


Rating	80 deg C, 300 Vac, Horizontal flame.

Conductor	No. 32 AWG minimum, solid or stranded round, tinned or bare copper.

Insulation	Labeled or complying with Manufacturer's AWM Procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductor is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Covering	Optional. A 6 mil or heavier covering may be extruded over the conductor assembly.

Jacket	TPU
	dia. in inches
	0.700 or less	35 mils min average	28 mils minimum at any point
	0.701-1.000 dia	45 avg	36 min
	1.001-1.500 dia	60 avg	48 min
	1.501-2.500 dia	80 avg	64 min
	2.501-4.000 dia	110 avg	88 min
	4.001 dia and larger	140 avg	112 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.