UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21471
                        
                            Issued:2005-12-12
                    
                            Revised:2012-04-18
                    
                            Style
                            21471
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating150 deg C, 125 Vac, Horizontal flame.
		
			Conductor30 AWG - 15 AWG consisting of seven 38-30 AWG strands, tinned or bare copper.
		
			InsulationETFE, 12 mils min average, 11 mils minimum at any point.
		
			ShieldCopper, Wire Braid. Diameter of strands: 3.7 mils. Number of ends: 4.  Number of carriers: 16. Picks per inch: 25. Percent Coverage: Minimum 85%.
		
			JacketETFE, 6 mils min average, 5 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring and Heating Leads.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21471	Issued:2005-12-12
			Revised:2012-04-18


Rating	150 deg C, 125 Vac, Horizontal flame.

Conductor	30 AWG - 15 AWG consisting of seven 38-30 AWG strands, tinned or bare copper.

Insulation	ETFE, 12 mils min average, 11 mils minimum at any point.

Shield	Copper, Wire Braid. Diameter of strands: 3.7 mils. Number of ends: 4. Number of carriers: 16. Picks per inch: 25. Percent Coverage: Minimum 85%.

Jacket	ETFE, 6 mils min average, 5 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring and Heating Leads.