UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21472
                        
                            Issued:2005-12-20
                    
                            Revised:2011-10-30
                    
                            Style
                            21472
                        
                            Multiconductor Cable with Extruded Non-Integral Jacket
                    
			Rating60 deg C, 30 Vac, Horizontal flame, Cable flame.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure with minimum rating of 60?C, 30 V.
		
			AssemblyTwo or more insulated conductors.
		
			CoveringOptional.
		
			ShieldOptional.
		
			JacketExtruded mPPE-PE
		
			Dia. of Assembly Under Jacket in Inch.Minimum AverageMinimum at any point
		
			0.000-0.3502016
		
			0.351-0.7003024
		
			0.701-1.0004032
		
			1.001-1.5005443
		
			# Equivalent diameter of flat assembly = 1.1284 x (TW)0.5, where T is the thickness of the assembly under jacket, and W is the width of the assembly under jacket.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal wiring in Class 2 circuits.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21472	Issued:2005-12-20
			Revised:2011-10-30


Rating	60 deg C, 30 Vac, Horizontal flame, Cable flame.

Insulation	Labeled or complying with manufacturer's AWM Procedure with minimum rating of 60?C, 30 V.

Assembly	Two or more insulated conductors.

Covering	Optional.

Shield	Optional.

Jacket	Extruded mPPE-PE
	Dia. of Assembly Under Jacket in Inch.	Minimum Average	Minimum at any point
	0.000-0.350	20	16
	0.351-0.700	30	24
	0.701-1.000	40	32
	1.001-1.500	54	43
	# Equivalent diameter of flat assembly = 1.1284 x (TW)0.5, where T is the thickness of the assembly under jacket, and W is the width of the assembly under jacket.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External wiring in Class 2 circuits.