UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21481
                        
                            Issued:2006-02-20
                    
                            Revised:2014-04-14
                    
                            Style
                            21481
                        
                            Multiconductor cable with extruded non-integral jacket.
                    
			Rating80 deg C, 300 Vac, Horizontal flame.
		
			Conductor36 AWG minimum. Solid or stranded.
		
			InsulationLabeled or complying with this manufacturers AWM Procedure.
		
			AssemblyTwo or more insulated singles or groups of insulated singles cabled together to form a flat, oval or round assembly. Barrier layer and/or fillers optional. May use same or mixed AWG size. Manufacturer shall maintain a complete description of each assembly.
		
			CoveringOptional.
		
			ShieldOptional.
		
			JacketExtruded TPE.
		
			Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.700 inch or less30 mils24 mils
		
			0.701-1.000 inch45 mils36 mils
		
			1.001-1.500 inch60 mils48 mils
		
			1.501-2.500 inch80 mils64 mils
		
			2.500 inch and larger110 mils88 mils
		
			BraidOptional.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21481	Issued:2006-02-20
			Revised:2014-04-14


Rating	80 deg C, 300 Vac, Horizontal flame.

Conductor	36 AWG minimum. Solid or stranded.

Insulation	Labeled or complying with this manufacturers AWM Procedure.

Assembly	Two or more insulated singles or groups of insulated singles cabled together to form a flat, oval or round assembly. Barrier layer and/or fillers optional. May use same or mixed AWG size. Manufacturer shall maintain a complete description of each assembly.

Covering	Optional.

Shield	Optional.

Jacket	Extruded TPE.
	Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.700 inch or less	30 mils	24 mils
	0.701-1.000 inch	45 mils	36 mils
	1.001-1.500 inch	60 mils	48 mils
	1.501-2.500 inch	80 mils	64 mils
	2.500 inch and larger	110 mils	88 mils

Braid	Optional.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electronic equipment.