UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21483
                        
                            Issued:2006-02-20
                    
                            Revised:2019-11-07
                    
                            Style
                            21483
                        
                            Multiple conductor cable using extruded non-integral jacket
                    
			Rating80 deg C, 1000 Vac, Horizontal flame.
		
			Conductor36 AWG minimum solid or stranded.
		
			InsulationLabeled or complying with manufacturers AWM Procedure.
		
			AssemblyTwo or more insulated singles or groups of insulated singles cabled together to form a flat, oval or round assembly.  Barrier layer and/or fillers optional.  May use same or mixed AWG size. Manufacturer shall maintain a complete description of each assembly.
		
			ShieldOptional.
		
			CoveringOptional.
		
			BraidOptional.
		
			JacketExtruded TPE
		
			major dia. in inches
		
			0.700 or less45 mils min average36 mils min at any point
		
			0.701-1.000 dia6048
		
			1.001-1.500 dia8064
		
			1.501-2.500 dia11088
		
			2.500 dia and larger140112
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21483	Issued:2006-02-20
			Revised:2019-11-07


Rating	80 deg C, 1000 Vac, Horizontal flame.

Conductor	36 AWG minimum solid or stranded.

Insulation	Labeled or complying with manufacturers AWM Procedure.

Assembly	Two or more insulated singles or groups of insulated singles cabled together to form a flat, oval or round assembly. Barrier layer and/or fillers optional. May use same or mixed AWG size. Manufacturer shall maintain a complete description of each assembly.

Shield	Optional.

Covering	Optional.

Braid	Optional.

Jacket	Extruded TPE
	major dia. in inches
	0.700 or less	45 mils min average	36 mils min at any point
	0.701-1.000 dia	60	48
	1.001-1.500 dia	80	64
	1.501-2.500 dia	110	88
	2.500 dia and larger	140	112

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electronic equipment.