UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21485
                        
                            Issued:2006-02-20
                    
                            Revised:2011-09-16
                    
                            Style
                            21485
                        
                            Multiconductor cable with extruded non-integral jacket
                    
			Rating90 deg C, 600 Vac, Horizontal flame.
		
			Conductor36 AWG min. solid or stranded.
		
			InsulationLabeled or complying with manufacturers AWM Procedure.
		
			AssemblyTwo or more insulated singles or groups of insulated singles cabled together to form a flat, oval or round assembly. Barrier layer and/or fillers optional. May use same or mixed AWG size. Manufacturer shall maintain a complete description of each assembly.
		
			CoveringOptional.
		
			ShieldOptional.
		
			JacketExtruded TPE
		
			dia. of core assembly under jacketminimum average thicknessminimum thickness at any point
		
			0.700 inch or less45 mils36 mils
		
			0.701-1.000 inch60 mils48 mils
		
			1.001-1.500 inch80 mils64 mils
		
			1.501-2.500 inch110 mils88 mils
		
			2.500 inch and larger140 mils112 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electronic equipment and appliances.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 21485	Issued:2006-02-20
			Revised:2011-09-16


Rating	90 deg C, 600 Vac, Horizontal flame.

Conductor	36 AWG min. solid or stranded.

Insulation	Labeled or complying with manufacturers AWM Procedure.

Assembly	Two or more insulated singles or groups of insulated singles cabled together to form a flat, oval or round assembly. Barrier layer and/or fillers optional. May use same or mixed AWG size. Manufacturer shall maintain a complete description of each assembly.

Covering	Optional.

Shield	Optional.

Jacket	Extruded TPE
	dia. of core assembly under jacket	minimum average thickness	minimum thickness at any point
	0.700 inch or less	45 mils	36 mils
	0.701-1.000 inch	60 mils	48 mils
	1.001-1.500 inch	80 mils	64 mils
	1.501-2.500 inch	110 mils	88 mils
	2.500 inch and larger	140 mils	112 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electronic equipment and appliances.