UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21487
                        
                            Issued:2006-02-24
                    
                            Revised:2011-10-20
                    
                            Style
                            21487
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating150 deg C, 300 Vac, Horizontal flame (construction A only).
		
			Conductor36 AWG - 20 AWG solid or stranded.
		
			AssemblyTwo to six individually insulated conductors or groups of conductors cabled together into a round cable. Lay not specified.
		
			InsulationExtruded ETFE, 9 mils min average, 8 mils min at any point.
		
			ShieldAluminum polyester tape shield, min 10% overlap, 1.0 mils min, with drain wire.
		
			CoveringConstruction A: Extruded FR XLPE, 9 mils min avg. thickness, 7 mils min thickness at any point. Construction B: Extruded XLPE, 9 mils minimum average thickness, 7 mils min. thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseCONSTRUCTION A: Internal Wiring, High Resistance Heater Wire. 
CONSTRUCTION B: For Further Processing, High Resistance Heater Wire.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 21487	Issued:2006-02-24
			Revised:2011-10-20


Rating	150 deg C, 300 Vac, Horizontal flame (construction A only).

Conductor	36 AWG - 20 AWG solid or stranded.

Assembly	Two to six individually insulated conductors or groups of conductors cabled together into a round cable. Lay not specified.

Insulation	Extruded ETFE, 9 mils min average, 8 mils min at any point.

Shield	Aluminum polyester tape shield, min 10% overlap, 1.0 mils min, with drain wire.

Covering	Construction A: Extruded FR XLPE, 9 mils min avg. thickness, 7 mils min thickness at any point. Construction B: Extruded XLPE, 9 mils minimum average thickness, 7 mils min. thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	CONSTRUCTION A: Internal Wiring, High Resistance Heater Wire. CONSTRUCTION B: For Further Processing, High Resistance Heater Wire.