UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2149
                        
                            Issued:1959-05-01
                    
                            Revised:2012-07-03
                    
                            Style
                            2149
                        
                            Parallel Cable with Extruded Integral Insulation and Jacket.
                    
			Rating80 deg C, 300 Vac, FT2 flame, Oil Resistant 60 deg C or 80 deg C (optional).
		
			Conductor20 AWG consisting of No. 30 AWG or smaller.
		
			InsulationIntegral with Jacket. Extruded PVC, 60 mils mininum average thickness, 54 mils minimum thickness at any point, with the following minimum (pin gauge) dimensions: Web thickness: 0.070 in., Wall after rip: 0.028 in..
		
			AssemblyTwo conductors, same as type SPT-2
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electric refrigerators where installed within separate metal enclosures or between the walls of the cabinet, and where exposed to temperatures not exceeding 80 deg C. Dependent upon the compound used, the tag may add: and where exposed to oil at a temperature not exceeding (60 deg C or 80 deg C, whichever is applicable). Polarity identification may be omitted.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2149	Issued:1959-05-01
			Revised:2012-07-03


Rating	80 deg C, 300 Vac, FT2 flame, Oil Resistant 60 deg C or 80 deg C (optional).

Conductor	20 AWG consisting of No. 30 AWG or smaller.

Insulation	Integral with Jacket. Extruded PVC, 60 mils mininum average thickness, 54 mils minimum thickness at any point, with the following minimum (pin gauge) dimensions: Web thickness: 0.070 in., Wall after rip: 0.028 in..

Assembly	Two conductors, same as type SPT-2

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electric refrigerators where installed within separate metal enclosures or between the walls of the cabinet, and where exposed to temperatures not exceeding 80 deg C. Dependent upon the compound used, the tag may add: and where exposed to oil at a temperature not exceeding (60 deg C or 80 deg C, whichever is applicable). Polarity identification may be omitted.