UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21490
                        
                            Issued:2006-03-16
                    
                            Revised:2017-10-31
                    
                            Style
                            21490
                        
                            Multiple Conductor Cable using non-extruded jacket
                    
			Rating80 deg C, 30 Vac, Horizontal flame.
		
			Conductor36 AWG - 22 AWG solid or stranded.
		
			Insulated singlesLabeled or complying with manufacturer's AWM Procedure. Drain wire may be supplied with the flat cable construction.
		
			ShieldCopper Mylar Foil Tape or Copper Foil or Aluminum polyester foil (Facing into conductors heat sealed to Polyester jacket). 1.0 mil minimum average and 0.8 mil minimum thickness at any point with minimum 25% overlap.
		
			JacketHeat sealed Polyester Tape, 1.5 mils min average and 1.0 mil minimum thickness at any point with minimum 25% overlap.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 21490	Issued:2006-03-16
			Revised:2017-10-31


Rating	80 deg C, 30 Vac, Horizontal flame.

Conductor	36 AWG - 22 AWG solid or stranded.

Insulated singles	Labeled or complying with manufacturer's AWM Procedure. Drain wire may be supplied with the flat cable construction.

Shield	Copper Mylar Foil Tape or Copper Foil or Aluminum polyester foil (Facing into conductors heat sealed to Polyester jacket). 1.0 mil minimum average and 0.8 mil minimum thickness at any point with minimum 25% overlap.

Jacket	Heat sealed Polyester Tape, 1.5 mils min average and 1.0 mil minimum thickness at any point with minimum 25% overlap.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.