UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21500
                        
                            Issued:2006-06-09
                    
                            Revised:2011-09-19
                    
                            Style
                            21500
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating60 deg C, 300 Vac, Horizontal flame.
		
			Conductor32 AWG minimum. Solid or stranded.
		
			InsulationLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductor is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			CoveringOptional.
		
			ShieldOptional.
		
			JacketExtruded PVC.
		
			*Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.350 inch or less11 mils9 mils
		
			0.351-0.700 inch30 mils24 mils
		
			0.701-1.000 in45 mils36 mils
		
			1.001-1.500 inch60 mils48 mils
		
			*Major diameter if cable is flat or oval.
		
			BraidOptional.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21500	Issued:2006-06-09
			Revised:2011-09-19


Rating	60 deg C, 300 Vac, Horizontal flame.

Conductor	32 AWG minimum. Solid or stranded.

Insulation	Labeled or complying with manufacturer's AWM procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductor is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Covering	Optional.

Shield	Optional.

Jacket	Extruded PVC.
	*Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.350 inch or less	11 mils	9 mils
	0.351-0.700 inch	30 mils	24 mils
	0.701-1.000 in	45 mils	36 mils
	1.001-1.500 inch	60 mils	48 mils
	*Major diameter if cable is flat or oval.

Braid	Optional.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.