UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21512
                        
                            Issued:2006-09-05
                    
                            Revised:2012-03-30
                    
                            Style
                            21512
                        
                            Multiple-Conductor Cable Using Extruded Non-Integral Jacket
                    
			Rating105 deg C, 1000 Vac, Cable flame.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyTwo or more insulated conductors.
		
			ShieldOptional.
		
			CoveringOptional.
		
			JacketExtruded MPPE
		
			Diameter of core assembly under jacket (inches)Minimum average thickness (mils)Minimum thickness at any point (mils)
		
			0.700 or less*3024
		
			0.701-1.0004536
		
			1.001-1.5006048
		
			1.501-2.5008064
		
			*Equivalent diameter of flat assembly = 1.1284 x (TW)0.5 where T is the thickness of the assembly under jacket, and W is the width of the assembly under jacket
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring and external wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 21512	Issued:2006-09-05
			Revised:2012-03-30


Rating	105 deg C, 1000 Vac, Cable flame.

Insulation	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Two or more insulated conductors.

Shield	Optional.

Covering	Optional.

Jacket	Extruded MPPE
	Diameter of core assembly under jacket (inches)	Minimum average thickness (mils)	Minimum thickness at any point (mils)
	0.700 or less*	30	24
	0.701-1.000	45	36
	1.001-1.500	60	48
	1.501-2.500	80	64
	*Equivalent diameter of flat assembly = 1.1284 x (TW)0.5 where T is the thickness of the assembly under jacket, and W is the width of the assembly under jacket

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring and external wiring.