UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21525
                        
                            Issued:2006-11-13
                    
                            Revised:2018-03-07
                    
                            Style
                            21525
                        
                            Multi-conductor cable using non-integral jacket.
                    
			Rating80 deg C, 90 Vac, Cable flame.
		
			Conductor40 AWG min, solid or stranded.
		
			InsulationLabeled or complying with manufacturer's AWM procedure having min rating of 80C and 90V.
		
			AssemblyTwo or more individually insulated conductors or groups of insulated conductors cabled together to form a round cable.  A flat or oval cable may also be constructed with not more than three rows of single conductors or groups of conductors.  The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required.  A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; thermoplastic covering or thermoplastic tape wrap.  The barrier layer may be applied over the twisted assembly of individual conductors, groups of conductors or individual conductors or over the shield, if provided.
		
			ShieldOptional.
		
			JacketExtruded TPU
		
			dia. under jacket in incheMin average thickness milsMin at any point thickness mils
		
			0-0.7003024
		
			0.701-1.0004536
		
			1.001-1.5006048
		
			1.501-2.5008064
		
			2.501-4.00011088
		
			4.001 and larger140112
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring or external interconnection of electronic equipment or Internal wiring or external interconnection of electronic equipment in abuse areas.

                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 21525	Issued:2006-11-13
			Revised:2018-03-07


Rating	80 deg C, 90 Vac, Cable flame.

Conductor	40 AWG min, solid or stranded.

Insulation	Labeled or complying with manufacturer's AWM procedure having min rating of 80C and 90V.

Assembly	Two or more individually insulated conductors or groups of insulated conductors cabled together to form a round cable. A flat or oval cable may also be constructed with not more than three rows of single conductors or groups of conductors. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; thermoplastic covering or thermoplastic tape wrap. The barrier layer may be applied over the twisted assembly of individual conductors, groups of conductors or individual conductors or over the shield, if provided.

Shield	Optional.

Jacket	Extruded TPU
	dia. under jacket in inche	Min average thickness mils	Min at any point thickness mils
	0-0.700	30	24
	0.701-1.000	45	36
	1.001-1.500	60	48
	1.501-2.500	80	64
	2.501-4.000	110	88
	4.001 and larger	140	112

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring or external interconnection of electronic equipment or Internal wiring or external interconnection of electronic equipment in abuse areas.