UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21527
                        
                            Issued:2006-11-13
                    
                            Revised:2018-03-07
                    
                            Style
                            21527
                        
                            Multiconductor cable with extruded non-integral jacket.
                    
			Rating80 deg C, 300 Vac Cable flame.
		
			Conductor40 AWG minimum, solid or stranded.
		
			InsulationLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyTwo or more individually insulated conductors or groups of insulated conductors cabled together to form a round cable.  A flat or oval cable may also be constructed with not more than three rows of single conductors or groups of conductors.  The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required.  A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; PET; thermoplastic covering or thermoplastic tape wrap.  The barrier layer may be applied over the twisted assembly of individual conductors, groups of conductors or individual conductors or over the shield, if provided.
		
			ShieldOptional. Location not specified.
		
			JacketExtruded PUR.
		
			*Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.700 inch or less30 mils24 mils
		
			0.701-1.000 inch45 mils36 mils
		
			1.001-1.500 inch60 mils48 mils
		
			1.501-2.500 inch80 mils64 mils
		
			2.501-4.000 inch110 mils88 mils
		
			4.001 inch and larger140 mils112 mils
		
			*Major dia if cable is flat or oval.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring or external interconnection of electronic equipment.

					      or

			Internal wiring or external interconnection of
			electronic equipment in abuse areas.

                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21527	Issued:2006-11-13
			Revised:2018-03-07


Rating	80 deg C, 300 Vac Cable flame.

Conductor	40 AWG minimum, solid or stranded.

Insulation	Labeled or complying with manufacturer's AWM procedure.

Assembly	Two or more individually insulated conductors or groups of insulated conductors cabled together to form a round cable. A flat or oval cable may also be constructed with not more than three rows of single conductors or groups of conductors. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; PET; thermoplastic covering or thermoplastic tape wrap. The barrier layer may be applied over the twisted assembly of individual conductors, groups of conductors or individual conductors or over the shield, if provided.

Shield	Optional. Location not specified.

Jacket	Extruded PUR.
	*Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.700 inch or less	30 mils	24 mils
	0.701-1.000 inch	45 mils	36 mils
	1.001-1.500 inch	60 mils	48 mils
	1.501-2.500 inch	80 mils	64 mils
	2.501-4.000 inch	110 mils	88 mils
	4.001 inch and larger	140 mils	112 mils
	*Major dia if cable is flat or oval.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring or external interconnection of electronic equipment. or Internal wiring or external interconnection of electronic equipment in abuse areas.