UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21530
                        
                            Issued:2006-12-08
                    
                            Revised:2012-03-30
                    
                            Style
                            21530
                        
                            Multi-conductor cable using non-integral jacket
                    
			Rating90 deg C, 600 Vac, Cable flame.
		
			Conductor26 AWG minimum.  Solid or stranded.
		
			InsulationLabeled or complying with manufacturer's AWM procedure and having a minimum rating of 90 deg C and 600V, respectively.
		
			AssemblyTwo or more individually insulated conductors or groups of insulated conductors cabled together to form a round cable.  A flat or oval cable may also be constructed with not more than three rows of single conductors or groups of conductors.  The length of lay of the twisted conductors or groups is not specified.  Fillers may be used in a cable but are not required.  A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic-tape wrap.  Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.
		
			ShieldOptional.
		
			CoveringOptional inner layer.
		
			JacketExtruded TPE
		
			dia of cable under jacket (in)Min average thickness (mils)Min thickness at any point (mils)
		
			0.700 or less4536
		
			0.701-1.0006048
		
			1.001-1.5008064
		
			1.501-2.50011088
		
			2.501 and larger140112
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring or External Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21530	Issued:2006-12-08
			Revised:2012-03-30


Rating	90 deg C, 600 Vac, Cable flame.

Conductor	26 AWG minimum. Solid or stranded.

Insulation	Labeled or complying with manufacturer's AWM procedure and having a minimum rating of 90 deg C and 600V, respectively.

Assembly	Two or more individually insulated conductors or groups of insulated conductors cabled together to form a round cable. A flat or oval cable may also be constructed with not more than three rows of single conductors or groups of conductors. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.

Shield	Optional.

Covering	Optional inner layer.

Jacket	Extruded TPE
	dia of cable under jacket (in)	Min average thickness (mils)	Min thickness at any point (mils)
	0.700 or less	45	36
	0.701-1.000	60	48
	1.001-1.500	80	64
	1.501-2.500	110	88
	2.501 and larger	140	112

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring or External Wiring.