UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21531
                        
                            Issued:2006-12-19
                    
                            Revised:2014-09-15
                    
                            Style
                            21531
                        
                            Multiple Conductor Cable using Non-Integral Jacket
                    
			Rating80 deg C, Voltage Not Specified, VW-1 Flame (Construction A Only).
		
			ConductorMin. 40 AWG, Solid or Stranded.
		
			InsulationLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyConstruction A - Two or more groups of conductors labeled or complying with manufacturer's AWM Procedure and having a temperature and voltage rating equaling or exceeding the rating of the cable.  These groups are laid parallel with an overall extruded expanded PTFE jacket with THV film and these groups are joined together by an interconnecting web.  The lay of the conductors within each group is not specified.  Barrier layer and/or fillers and strength members are optional.  Manufacturer shall maintain a complete description of each assembly.  May use same or mixed AWG.

Construction B - Same as Construction A except employs extruded TPU tubing cores.
		
			ShieldOptional.
		
			CoveringOptional inner layer.
		
			JacketNon-Extruded, consists of Extruded Foamed PTFE with Inner Extruded THV Layer. See Table below:
		
			Materialmils min. averagemils min. at any point
		
			PFTE21
		
			THV1211
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseConstruction A: Internal wiring.
Construction B: For Further Processing into Jacketed Cables or Internal Wiring without Flame Rating.

                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21531	Issued:2006-12-19
			Revised:2014-09-15


Rating	80 deg C, Voltage Not Specified, VW-1 Flame (Construction A Only).

Conductor	Min. 40 AWG, Solid or Stranded.

Insulation	Labeled or complying with manufacturer's AWM procedure.

Assembly	Construction A - Two or more groups of conductors labeled or complying with manufacturer's AWM Procedure and having a temperature and voltage rating equaling or exceeding the rating of the cable. These groups are laid parallel with an overall extruded expanded PTFE jacket with THV film and these groups are joined together by an interconnecting web. The lay of the conductors within each group is not specified. Barrier layer and/or fillers and strength members are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG. Construction B - Same as Construction A except employs extruded TPU tubing cores.

Shield	Optional.

Covering	Optional inner layer.

Jacket	Non-Extruded, consists of Extruded Foamed PTFE with Inner Extruded THV Layer. See Table below:
	Material	mils min. average	mils min. at any point
	PFTE	2	1
	THV	12	11

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Construction A: Internal wiring. Construction B: For Further Processing into Jacketed Cables or Internal Wiring without Flame Rating.