UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21539
                        
                            Issued:2007-02-27
                    
                            Revised:2011-10-18
                    
                            Style
                            21539
                        
                            Multiconductor Cable with Extruded Insulation and Extruded Covering
                    
			Rating90 deg C, 300 Vac, Horizontal flame (construction A only).
		
			Conductor36 AWG - 20 AWG min. Resistance Wire.
		
			InsulationExtrudded ETFE, 9 mils minimum average thickness, 8 mils minimum at any point
		
			Assembly2-6 individually insulated conductors or groups of conductors cabled together into a round cable.
		
			ShieldBraid (85 percent min coverage tinned or bare copper or stainless steel).  Over the individual or groups of conductors.
		
			CoveringConstruction A: XLFRLPE, 9 mils minimum average thickness, 7 mils minimum thickness at any point. Construction B: XLPE, 9 mils minimum average thickness, 7 mils minimum thickness at any point.
		
			BraidOptional.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseCONSTRUCTION A:  Internal Wiring, High Resistance Heater Wire. CONSTRUCTION B: For Further Processing, High Resistance Heater Wire.

                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 21539	Issued:2007-02-27
			Revised:2011-10-18


Rating	90 deg C, 300 Vac, Horizontal flame (construction A only).

Conductor	36 AWG - 20 AWG min. Resistance Wire.

Insulation	Extrudded ETFE, 9 mils minimum average thickness, 8 mils minimum at any point

Assembly	2-6 individually insulated conductors or groups of conductors cabled together into a round cable.

Shield	Braid (85 percent min coverage tinned or bare copper or stainless steel). Over the individual or groups of conductors.

Covering	Construction A: XLFRLPE, 9 mils minimum average thickness, 7 mils minimum thickness at any point. Construction B: XLPE, 9 mils minimum average thickness, 7 mils minimum thickness at any point.

Braid	Optional.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	CONSTRUCTION A: Internal Wiring, High Resistance Heater Wire. CONSTRUCTION B: For Further Processing, High Resistance Heater Wire.