UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21549
                        
                            Issued:2007-04-17
                    
                            Revised:2012-03-27
                    
                            Style
                            21549
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating105 deg C, 600 Vac, FT-2 flame.
		
			Conductor14 AWG - 10 AWG, stranded, stranding according for Type ST.
		
			InsulationExtruded PVC, 15 mils min average, 13 mils minimum at any point for 14 and 12 AWG, 20 mils min average, 18 mils minimum at any point for 10 AWG.
		
			AssemblyConsists of five groups, maximum 3 conductors each, maximum 15 conductors total, laid parallel forming a flat cable.
		
			CoveringExtruded Nylon, 4 mils minimum thickness at any point, extruded over each insulation.
		
			JacketExtruded TPE, 82 mils min average, 65 mils minimum at any point. Applied over the parallel, insulated conductors.  The overall cable is 0.436 inches high and 1.6 inches wide.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseIn the manufacture of Special Use Cord Sets where extra-hard-usage cord is required and where the acceptability of the combination is determined by Underwriters Laboratories Inc.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 21549	Issued:2007-04-17
			Revised:2012-03-27


Rating	105 deg C, 600 Vac, FT-2 flame.

Conductor	14 AWG - 10 AWG, stranded, stranding according for Type ST.

Insulation	Extruded PVC, 15 mils min average, 13 mils minimum at any point for 14 and 12 AWG, 20 mils min average, 18 mils minimum at any point for 10 AWG.

Assembly	Consists of five groups, maximum 3 conductors each, maximum 15 conductors total, laid parallel forming a flat cable.

Covering	Extruded Nylon, 4 mils minimum thickness at any point, extruded over each insulation.

Jacket	Extruded TPE, 82 mils min average, 65 mils minimum at any point. Applied over the parallel, insulated conductors. The overall cable is 0.436 inches high and 1.6 inches wide.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	In the manufacture of Special Use Cord Sets where extra-hard-usage cord is required and where the acceptability of the combination is determined by Underwriters Laboratories Inc.