UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21555
                        
                            Issued:2005-12-13
                    
                            Revised:2019-11-07
                    
                            Style
                            21555
                        
                            Multiple conductor cable using extruded non-integral jacket
                    
			Rating90 deg C, 600 Vac, Cable flame.
		
			Conductor36 AWG - 2000 kcmil solid or stranded.
		
			InsulationExtruded EPDM, 30 mils minimum average thickness, 24 mils minimum thickness at any point.
		
			AssemblyTwo or more individually insulated conductors or groups of insulated conductors cabled together to form a round cable.  A flat or oval cable may also be constructed with not more than three rows of single conductors or groups of conductors.  The length of lay of the twisted conductors or groups is not specified.  Fillers may be used in a cable but are not required.  A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic-tape wrap.  Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.
		
			ShieldOptional.
		
			BraidOptional.
		
			JacketExtruded TPU
		
			dia
		
			0.700 inches or less45 mils min average36 mils min at any point
		
			0.701-1.000 dia6048
		
			1.001-1.500 dia8064
		
			1.501-2.50 dia11088
		
			2.500 dia and larger140112
		
			See Facing Page for Compound Designation.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21555	Issued:2005-12-13
			Revised:2019-11-07


Rating	90 deg C, 600 Vac, Cable flame.

Conductor	36 AWG - 2000 kcmil solid or stranded.

Insulation	Extruded EPDM, 30 mils minimum average thickness, 24 mils minimum thickness at any point.

Assembly	Two or more individually insulated conductors or groups of insulated conductors cabled together to form a round cable. A flat or oval cable may also be constructed with not more than three rows of single conductors or groups of conductors. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.

Shield	Optional.

Braid	Optional.

Jacket	Extruded TPU
	dia
	0.700 inches or less	45 mils min average	36 mils min at any point
	0.701-1.000 dia	60	48
	1.001-1.500 dia	80	64
	1.501-2.50 dia	110	88
	2.500 dia and larger	140	112
	See Facing Page for Compound Designation.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External Wiring.