UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21556
                        
                            Issued:2007-05-17
                    
                            Revised:2011-09-07
                    
                            Style
                            21556
                        
                            Multiple-conductor cable with Extruded Non-Integral Jacket
                    
			Rating105 deg C, 300 Vac, 60 or 80 degrees C oil resistnat (optional), Cable flame.
		
			Conductor18 AWG - 2 AWG min. stranded, tinned or bare copper.
		
			InsulationTPE
		
			AWG Sizeminimum average thicknessminimum thickness at any point
		
			18-8 AWG30 mils27 mils
		
			7-2 AWG45 mils40 mils
		
			AssemblyTwo or more,  individually insulated conductors or groups of insulated conductors to form a round cable.  The	length of lay of the twisted conductors or groups is not specified. Fillers may be use in a cable but are not required.  Barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented olyethylene terephthalate; or thermoplastic-tape wrap.

			JacketTPE
		
			Diameter of Cable under jacketminimum average thicknessminimum thickness at any point
		
			0.700 or less30 mils23 mils
		
			0.701-1.00045 mils36 mils
		
			1.001-1.50060 mils48 mils
		
			1.501-2.50080 mils64 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal Wiring.  May be marked "60C Oil Resistant" and/or "80C Oil Resistant".
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21556	Issued:2007-05-17
			Revised:2011-09-07


Rating	105 deg C, 300 Vac, 60 or 80 degrees C oil resistnat (optional), Cable flame.

Conductor	18 AWG - 2 AWG min. stranded, tinned or bare copper.

Insulation	TPE
	AWG Size	minimum average thickness	minimum thickness at any point
	18-8 AWG	30 mils	27 mils
	7-2 AWG	45 mils	40 mils

Assembly	Two or more, individually insulated conductors or groups of insulated conductors to form a round cable. The length of lay of the twisted conductors or groups is not specified. Fillers may be use in a cable but are not required. Barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented olyethylene terephthalate; or thermoplastic-tape wrap.

Jacket	TPE
	Diameter of Cable under jacket	minimum average thickness	minimum thickness at any point
	0.700 or less	30 mils	23 mils
	0.701-1.000	45 mils	36 mils
	1.001-1.500	60 mils	48 mils
	1.501-2.500	80 mils	64 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External Wiring. May be marked "60C Oil Resistant" and/or "80C Oil Resistant".