UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21557
                        
                            Issued:2007-05-17
                    
                            Revised:2021-11-09
                    
                            Style
                            21557
                        
                            Multiple-conductor cable using extruded Non-Integral Jacket
                    
			Rating105 deg C, 600 Vac, Horizontal Flame, Cable Flame. Optional - Oil resistant 60 or 80 degrees C
		
			Conductor18 AWG - 2 AWG stranded.
		
			InsulationExtruded TPE, 30 mils min average thickness, 27 mils minimum at any point thickness.
		
			AssemblyTwo or more, individually insulated conductors or groups of insulated conductors to form a round cable. The length of lay of the twisted conductors or groups is not specified. Fillers may be use in a cable but are not required. Barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic-tape wrap.
		
			JacketExtruded TPE
		
			Diameter of Cable Under Jacket in inchesJacket Min. Average Thickness in MilsMin Thickness at Any Point in Mils
		
			0.700 or less3023
		
			0.701-1.0004536
		
			1.001-1.5006048
		
			1.501-2.5008064
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21557	Issued:2007-05-17
			Revised:2021-11-09


Rating	105 deg C, 600 Vac, Horizontal Flame, Cable Flame. Optional - Oil resistant 60 or 80 degrees C

Conductor	18 AWG - 2 AWG stranded.

Insulation	Extruded TPE, 30 mils min average thickness, 27 mils minimum at any point thickness.

Assembly	Two or more, individually insulated conductors or groups of insulated conductors to form a round cable. The length of lay of the twisted conductors or groups is not specified. Fillers may be use in a cable but are not required. Barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic-tape wrap.

Jacket	Extruded TPE
	Diameter of Cable Under Jacket in inches	Jacket Min. Average Thickness in Mils	Min Thickness at Any Point in Mils
	0.700 or less	30	23
	0.701-1.000	45	36
	1.001-1.500	60	48
	1.501-2.500	80	64

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External Wiring.