UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21559
                        
                            Issued:2007-05-17
                    
                            Revised:2012-04-25
                    
                            Style
                            21559
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating105 deg C, 600 Vac, Cable flame.
		
			Conductor18 AWG - 2 AWG min. solid or stranded round.
		
			InsulationLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyTwo or more singles, twisted pairs of groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable.  Lay not specified.  Barrier layer and/or fillers optional.  Manufacturer shall maintain a complete description of each assembly.  May use same or mixed AWG size.
		
			CoveringOptional inner layer.
		
			ShieldOptional.
		
			JacketExtruded TPE
		
			Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.700 inch or less30 mils24 mils
		
			0.701-1.000 inch45 mils36 mils
		
			1.001-1.500 inch60 mils48 mils
		
			1.501-2.500 inch80 mils64 mils
		
			BraidOptional.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21559	Issued:2007-05-17
			Revised:2012-04-25


Rating	105 deg C, 600 Vac, Cable flame.

Conductor	18 AWG - 2 AWG min. solid or stranded round.

Insulation	Labeled or complying with manufacturer's AWM procedure.

Assembly	Two or more singles, twisted pairs of groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Covering	Optional inner layer.

Shield	Optional.

Jacket	Extruded TPE
	Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.700 inch or less	30 mils	24 mils
	0.701-1.000 inch	45 mils	36 mils
	1.001-1.500 inch	60 mils	48 mils
	1.501-2.500 inch	80 mils	64 mils

Braid	Optional.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External Wiring.