UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21566
                        
                            Issued:2007-07-24
                    
                            Revised:2012-04-24
                    
                            Style
                            21566
                        
                            Multiconductor Cable with Non-Integral Extruded Jacket.
                    
			Rating90 deg C, 300 Vac, Horizontal flame.
		
			Conductor32 AWG - 10 AWG min. solid or stranded round, tinned or bare copper.
		
			InsulationLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together.  The conductors 				or groups of conductors may be laid parallel forming a 				flat, oval or round cable.  The lay of the conductor is not 			specified.  A barrier layer and/or 	fillers are optional.  				Manufacturer shall maintain a complete description of each 				assembly.  May use same or mixed AWG size.
		
			ShieldOptional.
		
			Covering(Optional)  A 6 mil or heavier covering may be extruded over the conductor assembly.
		
			BraidOptional.
		
			JacketPUR - POLYURETHANE, 30 mils min average, 24 mils minimum at any point.  See facing page for compound.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 21566	Issued:2007-07-24
			Revised:2012-04-24


Rating	90 deg C, 300 Vac, Horizontal flame.

Conductor	32 AWG - 10 AWG min. solid or stranded round, tinned or bare copper.

Insulation	Labeled or complying with manufacturer's AWM procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductor is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Covering	(Optional) A 6 mil or heavier covering may be extruded over the conductor assembly.

Braid	Optional.

Jacket	PUR - POLYURETHANE, 30 mils min average, 24 mils minimum at any point. See facing page for compound.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.