UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21573
                        
                            Issued:2007-08-31
                    
                            Revised:2011-09-14
                    
                            Style
                            21573
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating80 deg C, 600 Vac, Horizontal flame.
		
			Conductor40 AWG minimum. solid or stranded.
		
			InsulationLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together.  The 		
			conductors or groups of conductors may be laid parallel 				forming a flat, oval or round cable.  The lay of the 					conductors is not specified.  A barrier layer and/or fillers 			are optional.  Manufacturer shall maintain a complete 				description of each assembly.  May use same or mixed AWG 				size.

			CoveringOptional. Extruded TPU, 28 mils or heavier.
		
			ShieldOptional.
		
			JacketExtruded TPU
		
			Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.700 inch or less30 mils24 mils
		
			0.701-1.000 inch60 mils48 mils
		
			1.001-1.500 inch80 mils64 mils
		
			1.501-2.500 inch110 mils88 mils
		
			2.501-3.500 inch140 mils112 mils
		
			3.501 inch or larger160 mils128 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21573	Issued:2007-08-31
			Revised:2011-09-14


Rating	80 deg C, 600 Vac, Horizontal flame.

Conductor	40 AWG minimum. solid or stranded.

Insulation	Labeled or complying with manufacturer's AWM procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Covering	Optional. Extruded TPU, 28 mils or heavier.

Shield	Optional.

Jacket	Extruded TPU
	Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.700 inch or less	30 mils	24 mils
	0.701-1.000 inch	60 mils	48 mils
	1.001-1.500 inch	80 mils	64 mils
	1.501-2.500 inch	110 mils	88 mils
	2.501-3.500 inch	140 mils	112 mils
	3.501 inch or larger	160 mils	128 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electronic equipment.