UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21576
                        
                            Issued:2007-10-15
                    
                            Revised:2019-11-07
                    
                            Style
                            21576
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating80 deg C, 1000 Vac, Optional 60 deg C or 80 deg C Oil, Horizontal flame.
		
			InsulationLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyTwo or more individually insulated conductors or groups of insulated conductors cabled together to form a round cable.  
			A flat or oval cable may also be constructed with not more 
			than three rows of single conductors or groups of 
			conductors.  The length of lay of the twisted conductors or
			groups is not specified.  Fillers may be used in a cable but 
			are not required.  A barrier layer, if employed, may be a 
			fibrous wrap serving, or braid; paper; nylon; oriented 
			polyethylene terephthalate; or thermoplastic-tape wrap.  
			Such a barrier layer would serve to protect the cable during 
			further processing and would be applied immediately over the
			twisted assembly of individual conductors or groups of 
			conductors.
		
			ShieldOptional.
		
			CoveringOptional inner layer.
		
			BraidOptional.
		
			JacketExtruded TPU
		
			Dia
		
			0.700 inches or less15 mils minimum average thickness12 mils minimum thickness at any point
		
			0.701 - 1.500 dia30 avg24 min
		
			1.501 - 2.500 dia45 avg36 min
		
			2.501 dia and larger60 avg54 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21576	Issued:2007-10-15
			Revised:2019-11-07


Rating	80 deg C, 1000 Vac, Optional 60 deg C or 80 deg C Oil, Horizontal flame.

Insulation	Labeled or complying with manufacturer's AWM procedure.

Assembly	Two or more individually insulated conductors or groups of insulated conductors cabled together to form a round cable. A flat or oval cable may also be constructed with not more than three rows of single conductors or groups of conductors. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.

Shield	Optional.

Covering	Optional inner layer.

Braid	Optional.

Jacket	Extruded TPU
	Dia
	0.700 inches or less	15 mils minimum average thickness	12 mils minimum thickness at any point
	0.701 - 1.500 dia	30 avg	24 min
	1.501 - 2.500 dia	45 avg	36 min
	2.501 dia and larger	60 avg	54 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.