UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21578
                        
                            Issued:2007-10-12
                    
                            Revised:2011-10-11
                    
                            Style
                            21578
                        
                            Parallel cable with non-extruded jacket
                    
			Rating80 deg C, 150 Vac, Horizontal flame.
		
			Conductor50 AWG - 10 AWG min. solid or stranded round.
		
			InsulationExtruded FRPE, 10 mils  minimum average thickness, 9 mils minimum thickness at any point.
		
			AssemblyTwo insulated conductors laid in parallel
		
			ShieldHeat-sealed Aluminum/polyester, provided over the assembly, 1 mils average thickness, 0.25 inch wide, minimum 25% overlap.
		
			JacketOptional. Heat-sealed TPES tape wrap, 0.5 mils average thickness, 0.25 inch wide, minimum 25% overlap.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21578	Issued:2007-10-12
			Revised:2011-10-11


Rating	80 deg C, 150 Vac, Horizontal flame.

Conductor	50 AWG - 10 AWG min. solid or stranded round.

Insulation	Extruded FRPE, 10 mils minimum average thickness, 9 mils minimum thickness at any point.

Assembly	Two insulated conductors laid in parallel

Shield	Heat-sealed Aluminum/polyester, provided over the assembly, 1 mils average thickness, 0.25 inch wide, minimum 25% overlap.

Jacket	Optional. Heat-sealed TPES tape wrap, 0.5 mils average thickness, 0.25 inch wide, minimum 25% overlap.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.