UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21582
                        
                            Issued:2007-10-24
                    
                            Revised:2011-09-19
                    
                            Style
                            21582
                        
                            Multiconductor Cable with Extruded Non-Integral Jacket
                    
			Rating80 deg C, 300 Vac, Internal Wiring.
		
			Conductor32 AWG - 10 AWG min. solid or stranded round, tinned or bare copper.
		
			InsulationHDPE, 9 mils minimum average thickness, 8 mils minimum thickness at any point.
		
			AssemblyTwo or more singles, twisted pairs of groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable.  Lay not specified.  Barrier layer and/or fillers optional.  Manufacturer shall maintain a complete description of each assembly.  May use same or mixed AWG size.  Jacketed groups may be laid parallel to form a complete flat cable with or without a web.

			ShieldAluminum/mylar foil, 2 mils average thickness, 30% overlap.
		
			JacketTPE
		
			dia of Cable under jacket 0.700 inches or less30 mils min average24 mils minimum at any point
		
			0.701-1.000 dia45 avg36 min
		
			1.001-1.500 dia60 avg48 min
		
			1.501-2.500 dia80 avg64 min
		
			2.501-4.000 dia110 avg88 min
		
			4.001 dia and larger140 avg112 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21582	Issued:2007-10-24
			Revised:2011-09-19


Rating	80 deg C, 300 Vac, Internal Wiring.

Conductor	32 AWG - 10 AWG min. solid or stranded round, tinned or bare copper.

Insulation	HDPE, 9 mils minimum average thickness, 8 mils minimum thickness at any point.

Assembly	Two or more singles, twisted pairs of groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size. Jacketed groups may be laid parallel to form a complete flat cable with or without a web.

Shield	Aluminum/mylar foil, 2 mils average thickness, 30% overlap.

Jacket	TPE
	dia of Cable under jacket 0.700 inches or less	30 mils min average	24 mils minimum at any point
	0.701-1.000 dia	45 avg	36 min
	1.001-1.500 dia	60 avg	48 min
	1.501-2.500 dia	80 avg	64 min
	2.501-4.000 dia	110 avg	88 min
	4.001 dia and larger	140 avg	112 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.