UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21585
                        
                            Issued:2008-01-31
                    
                            Revised:2011-10-20
                    
                            Style
                            21585
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating150 deg C, 300 Vac Horizontal flame.
		
			Conductor36 AWG - 20 AWG min. solid or stranded.
		
			Assembly2-6 individually insulated conductors or groups of conductors cabled together into a round cable.  Lay not specified.
		
			InsulationExtruded ETFE, 9 mils min average, 8 mils min at any point
		
			ShieldAluminum polyester tape shield, min 10% overlap, 1.0 mils min, with drain wire over the individual or groups of conductors.
		
			CoveringExtruded ETFE (Ethylene and Tetratluroethylene), or PVDF 9 mils min avg., 7 mils min at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseResistance wire for heating mats where the acceptability is determined by Underwriters Laboratories.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 21585	Issued:2008-01-31
			Revised:2011-10-20


Rating	150 deg C, 300 Vac Horizontal flame.

Conductor	36 AWG - 20 AWG min. solid or stranded.

Assembly	2-6 individually insulated conductors or groups of conductors cabled together into a round cable. Lay not specified.

Insulation	Extruded ETFE, 9 mils min average, 8 mils min at any point

Shield	Aluminum polyester tape shield, min 10% overlap, 1.0 mils min, with drain wire over the individual or groups of conductors.

Covering	Extruded ETFE (Ethylene and Tetratluroethylene), or PVDF 9 mils min avg., 7 mils min at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Resistance wire for heating mats where the acceptability is determined by Underwriters Laboratories.